how can man Tia Portabl to fluidsim connect

For this you set this device in the symbol table of PLC-Lab and then create the operands in the symbol table. Thereby the inputs should be written in the virtual plant of PLC-Lab and the outputs should be read.įor the access to the operands of FluidSim the device 'FluidSim' is used in PLC-Lab. It must be noted that only the operand ranges defined here can be read or written from PLC-Lab!Īs operands digital inputs, digital outputs as well as analog inputs and analog outputs are supported. If required, the ranges can be adapted or extended.

In the above representation, the digital inputs and outputs can be used from byte address 0 to byte address 7.įurthermore, the analog input channels 0 to 7 and the analog output channels 0 to 3 are available. This dialog can be used to define the number of usable digital inputs and outputs, as well as the usable analog input and output channels. For this purpose, the corresponding button 'Define IO range' is selected.Īs a result, the 'Define IO range' dialog appears. Now the I/O area to be used can be defined in the 'Virtual Controller' tab. The following illustration shows the necessary setting. The data flow of the virtual controller must be set correctly in the 'Overview' tab of EzOPC. The connection is established via OPC DA, which is why the OPC server 'EzOPC' from Festo Didactic in version 5.X must be installed. The device with the designation 'FluidSim' is to be used if PLC-Lab is to work together with the software FluidSim 5 or FluidSim 6 from Festo. Basic requirements for using the 'FluidSim' device ¶ If this is not the case, then a corresponding error message appears when the simulation is started.

If the 'Option: FluidSim' is displayed here, then the device is available. Whether the device 'FluidSim' is available can be found out via the dialog 'Info about'. With the school versions the option 'FluidSim' must be acquired additionally, so that the device 'FluidSim' can be used.

Tutorial FluidSim Which editions of PLC-Lab support the 'FluidSim' device? ¶įluidSim is supported by the Pro-Edition of PLC-Lab. Use of analog output channels within FluidSim and PLC-Lab Use of analog input channels within FluidSim and PLC-Lab Use of digital outputs within FluidSim and PLC-LabĪddressing and using the analog inputs and outputs Use of digital inputs within FluidSim and PLC-Lab Which editions of PLC-Lab support the 'FluidSim' device?īasic requirements for using the 'FluidSim' deviceĪddressing and using the digital inputs and outputs Tutorial CodeSys V3 controller via OPC UA

How can man Tia Portabl to fluidsim connect